Camlok RP rail pulling clamp
The RP rail pulling clamps are designed to be used when positioning lengths of rail. They have been designed to fit most standard rail currently in use. To pull your length of rail you simply place the clamp over the head of the rail, at the end, and tighten the threaded bar (by hand) until it is clamped on to the rail web.
Once clamped to the rail you are ready to use by attaching the hook of your chain directly on to the shackle at the top of the clamp and begin pulling.
To release, simply unscrew the threaded bar and lift clamp from the rail.
The units shown are the industry standard. Other sizes are available upon request. Please contact our engineering team for details.
|Model||Working Load Limit
|Number of Rails||Weight*
* Weight without shackle